Abu Dhabi builds fast, and old machines pile up just as fast. Once an excavator, crane or generator is past repair, it stops being an asset and becomes a storage problem. It also becomes a source of recoverable metal. Heavy machinery scrap in Abu Dhabi currently moves at about AED 2,000 to 3,500 per ton, depending on the machine type, its condition and how much copper and aluminium it carries. This guide explains how pricing works, what metals sit inside old equipment, how to sell step by step and how to pick a buyer you can trust.
Heavy machinery scrap in Abu Dhabi is old excavators, cranes, loaders, generators and plant machines sold by the ton, with complete machines currently priced at about AED 2,000 to 3,500 per ton. The final price depends on how much copper and aluminium the machine holds, how clean it is, how easy it is to reach and the weight on a certified weighbridge. Sellers get the best result by choosing a licensed buyer with a valid waste permit who can dismantle, load and transport on site.
What Counts as Heavy Machinery Scrap in Abu Dhabi?
Heavy machinery scrap is any large mechanical equipment that has reached the end of its working life and is sold for its metal value. It differs from plain structural steel because machines contain mixed materials, such as thick steel, cast iron, copper windings and aluminium parts.
Common examples include:
- Earthmoving equipment: excavators, bulldozers, wheel loaders and backhoes
- Lifting equipment: mobile cranes, forklifts and hoists
- Transport equipment: dump trucks, trailers and tipper bodies
- Power equipment: diesel generators, compressors and pumps
- Industrial plant machines: crushers, mixers, presses and conveyor systems
- Road equipment: graders, rollers and asphalt plant units
Some machines leave a site as complete units. Others are sold as dismantled lots after a project ends or a plant shuts down.
Heavy Machinery Scrap Price in Abu Dhabi: AED 2,000 to 3,500 Per Ton
Scrap in the UAE is traded by the ton, and heavy machinery follows the same rule. For complete machines, the working range is AED 2,000 to 3,500 per ton. A machine with a mostly steel body sits near the lower end. A machine with large electric motors, copper wiring, alternators and aluminium radiators sits near the upper end.
Plain steel scrap alone trades well below this range. That is why selling a machine as a whole unit usually pays better than selling it as general ferrous scrap. The final offer also depends on the weight recorded at a certified weighbridge, the daily metal market and the cost of collection.
What Raises the Price
- High non-ferrous content: copper and aluminium add the most value per ton
- Drained and cleaned machines: less processing work for the buyer
- Large lots: handling cost per ton drops when many units are collected together
- Easy access: machines on firm ground near a road are cheaper to load
What Lowers the Price
- Heavy contamination from oil, concrete or soil
- A large share of rubber, plastic, glass and seats
- Remote sites that need special cranes or transport
- Weak market periods
Metal rates move with global markets, which we explain in our guide on why scrap metal prices fluctuate in the UAE.
Which Metals Can Be Recovered From Old Heavy Equipment?
A scrapped machine is really a bundle of different metals. Knowing what is inside helps you judge a fair offer.
- Steel and cast iron: frames, booms, buckets, counterweights and engine blocks. Our page on iron scrap in Abu Dhabi UAE covers this grade in detail
- Copper: motor windings, alternators, starter motors and cables. See the guide to copper scrap in Abu Dhabi UAE
- Aluminium: radiators, pistons, housings and cooling parts. Current rates are listed under aluminium scrap price in uae
- Hardened alloy steel: tracks, bucket teeth and hydraulic parts, explained in alloy steel scrap in Abu Dhabi
- Stainless steel: exhaust parts, pumps and fittings
- Lead: batteries, which must be removed and handled separately
Large motors deserve special attention. A single industrial motor can hold a lot of copper, so electric motor scrap is often pulled out and priced on its own.
Where Heavy Machinery Scrap Comes From in Abu Dhabi
Supply comes from several sectors:
- Construction and infrastructure sites after a project is complete
- Oil and gas facilities during fleet replacement or decommissioning
- Industrial areas such as Musaffah and KEZAD when factories upgrade or close
- Ports and marine yards with aging cranes and handling equipment
- Government and municipal fleets that clear old assets
When a whole plant closes, the machinery usually comes out as part of industrial demolition in Abu Dhabi UAE. Planning both jobs together saves time and avoids paying two contractors.
How to Sell Heavy Machinery Scrap in Abu Dhabi: 6 Steps
- List your machines: note the type, make, model, year, approximate weight, location and add clear photos.
- Request a site visit: a serious buyer inspects the units and gives a per ton quote based on the current market.
- Confirm the scope: agree in writing who dismantles, who loads and who pays for transport.
- Prepare the machines: oil, hydraulic fluid, coolant and batteries need safe removal. Your buyer can handle this under permit.
- Weigh the load: use a certified weighbridge and keep the weight slip.
- Receive payment: payment should match the weight slip and the agreed rate.
Many sellers lose money at step 3. A quote that does not say who pays for cutting and transport can look high on paper and still cost you more in the end.
Permits and Paperwork for Scrapping Heavy Equipment
Scrap handling in Abu Dhabi falls under environmental and waste rules. Before any machine leaves your site, ask for these:
- A valid trade license that covers scrap or waste activity
- An EAD waste management permit for handling and transport
- Tadweer approval for recycling and waste management work
- Proof of ownership or a release letter from the asset owner
- Registration cancellation where the equipment is registered with traffic authorities
- Safety credentials such as ISO 45001 for on-site work
Global Scrap Trading holds an EAD waste management permit, ISO 9001, ISO 14001 and ISO 45001 certification and Tadweer approval. Fluids, batteries and refrigerants in old machines must be disposed of legally, so a buyer without these papers can leave you with a compliance problem.
Dismantling Large Machines Safely On Site
Big machines cannot simply be lifted onto a truck. Cranes, plant structures and fixed industrial units need cutting, rigging and controlled removal. Hydraulic shears, plasma cutters and high capacity cranes do this work.
A buyer who is also a licensed demolition company in abu dhabi can dismantle, load and haul in one job. That cuts both cost and risk. GST works this way, recovering metal on site and buying it at market rates, which helps offset the cost of the project for the client.
How to Choose a Heavy Machinery Scrap Buyer
- Check the license and waste permit: ask to see both
- Ask for per ton pricing: avoid quotes by piece or by kilo
- Look at past work: government and oil and gas clients show real capacity
- Confirm site equipment: cranes, cutters and trucks should belong to the buyer
- Get the terms in writing: scope, weighing method and payment timing
- Compare more than one offer: a good buyer will explain the number
You can read more in our overview of the scrap buyer in UAE service.
Common Mistakes Sellers Make
- Accepting a quote without a clear weight basis
- Skipping the weighbridge slip
- Leaving fluids in the machine and facing deductions
- Selling to unlicensed collectors with no permit
- Ignoring the copper and aluminium parts, which carry most of the extra value
Frequently Asked Questions
What is the price of heavy machinery scrap in Abu Dhabi per ton?
Heavy machinery scrap in Abu Dhabi is priced at about AED 2,000 to 3,500 per ton for complete machines. The exact rate depends on the machine type, copper and aluminium content, condition, access and the current metal market.
Can I sell a machine that no longer runs?
Yes, a machine that no longer runs can be sold as scrap. Buyers pay for the metal inside it, so a broken engine or damaged hydraulics does not stop the sale.
Do I need to dismantle the machine before selling?
No, you do not need to dismantle it yourself. A licensed buyer can cut, load and transport the machine on site, and this is usually safer and cheaper than doing it alone.
Which documents are needed to scrap heavy equipment?
You need proof of ownership or a release letter, and registration cancellation where the equipment is registered. Your buyer should also hold a valid trade license, an EAD waste management permit and Tadweer approval.
Conclusion
Heavy machinery scrap in Abu Dhabi is worth more than plain steel because of the copper, aluminium and alloy parts inside each unit. At AED 2,000 to 3,500 per ton, the right buyer, a clear scope and a proper weight record decide how much you actually keep. Work with a licensed company that can dismantle and transport on site, and get every term in writing.
About the Author
Ibrahim Khan is the CEO of Global Scrap Trading (GST), a licensed scrap trading and demolition company based in Musaffah, Abu Dhabi. With more than 10 years in the scrap and demolition industry, he has led projects for ADNOC, ENEC, Baker Hughes and several government bodies across the UAE. GST holds ISO 9001, ISO 14001 and ISO 45001 certification, an EAD waste management permit and Tadweer approval.